DESMOSEAL PUTTY-PU

Description

DESMOSEAL MASILLA PU, a monocomponent polyurethan putty that cures rapidly on contact with moisture in the atmosphere, forming a hard seal, elastic, with a medium-high modulus of elasticity. Does not contain solvents or PVC, for sealing both vertical and horizontal joints.

Advantages

Excellent resistance to the passage of time.
Fast curing
Excellent adhesion on almost any surface.
Excellent thermal resistance to extreme temperatures (between 40 º C and + 90 º C).
Can be painted after drying.

Uses

Floor Joints (No Expansion)
General industrial sealant, automotive or glass.
Door frames
Ventilation units and air conditioners

Application

Requires smooth, clean, dry supports without any residual moisture and the hardest surface possible.
It should be applied in a temperature range between +5 º C to +40 º C.
In cold weather store the product at 20 ° C before use.
From bellow and joint base to control the depth of sealing.
Manipulate immediately after application.
For a correct application the ratio width / depth should be 2:1 at a minimum depth of 10mm.
Wipe with paper towels and then use a rag with DESMOPOL SOLVENT